> Faithful reproduction of genuine marble
> Hardwearing glazed porcelain construction
> Polished finish
> Multiple size variants available
> Available in matt and polished variants
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles
*Suitable matting should be in place to absorb water splashes etcR10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
No Reviews Found
Jerry 13/01/21
Hi there, can i check if these are both floor and wall? The information breakdown specifies only floor?
Our advice: They are suitable for use on a wall providing the substrate you are tiling on to is suitable to take the weight.
Charlotte S. 10/06/20
Do you have a ready mixed tile adhesive that would be suitable for these tiles? Maori Keracolor SF needs to be mixed. Thank you.
Our advice: Unfortunately, ready mix adhesive only works on small ceramic tiles, so we do not, I am afraid. Mapei Keracolor SF is, however, a grout, and this only comes in a powder form and needs to be mixed as well.
Charlotte S. 03/06/20
Is this tile suitable for a walk in shower tray (wet room)?
Our advice: You could use them in a wet room; however, as it is polished porcelain, they are smooth to the touch and will be slippery when wet. Before purchasing, I would advise first to order a sample to ensure that these tiles are suitable for your project.
Catrin T. 15/05/20
Do they need to be sealed?
Our advice: Yes, these tiles do require sealing using Fila MP90.
Nicholas 09/05/20
Would these be suitable for the kitchen behind the hob acting as a potential splash back?
Our advice: These tiles would be suitable due to the porcelain material
Marjorie D. 12/04/20
Are they suitable for underfloor heating
Our advice: Yes, underfloor heating is suitable to be installed with these tiles.